Repairs
Take in a machine, move the repair through the workshop, and turn the work into an invoice.
A repair is one job on one machine for one customer. It records the machine, what is wrong with it, the parts and labour that went into it, its photos, and everything that happened along the way. Repairs are part of the repair workshop edition, see Editions.
Every repair gets a number such as REP-2609-K4X2A9: the letters REP, the year and month it was created (2609 is September 2026) and six characters. Use it on the phone with the customer; it also appears on the invoice.
Take in a machine
Owners, admins and technicians can take in repairs.
- Go to Repairs and choose New repair.
- Under Customer, search for the Customer.
- Under Location & machines, pick the Location where the job takes place; it starts at the customer's main address. Tick the machines the job covers under Machines at this location; the customer's machines elsewhere are listed below. For a machine the customer record doesn't have yet, choose Add machine or Add grinder, pick the model from your machine catalogue or type it, and enter the serial number and year. Keep Save to the customer at this location on to add it to the customer's machines as well.
- Under Issue, findings & notes, describe the Reported issue (symptoms). Add Findings once you know more, and anything the team should know in Internal notes / intake notes.
- Under Parts & labor, choose Add part / labor for each part. Start typing in Description to pick an article from your inventory, which fills in the name and price, or type a free description. Enter the Qty and Unit price.
- For your working time, enter Hours and Rate €/h under Labor. Labour is billed on top of the parts.
- Under Repair tracking, set the Status, Priority, Technician and SLA deadline, the date you promised the machine back.
- Choose Create repair.
A repair can cover several machines, such as an espresso machine and its grinders. Lists, invoices and the customer portal name the first espresso machine.
A new repair starts in Intake with priority Medium unless you choose otherwise. If you are not ready to take the machine in yet, choose Save as draft instead.
The SLA deadline puts the repair on the calendar, and the dashboard counts repairs whose deadline is at risk.
Repair statuses
| Status | Meaning |
|---|---|
| Draft | Saved, but not taken in yet. |
| Intake | The machine is in the workshop. |
| Diagnostics | The fault is being examined. |
| Parts ordered | Waiting for parts. |
| In progress | Being repaired. |
| Testing | Repaired and being checked. |
| Ready for pickup | Done and waiting for the customer. |
| Delivered | Back with the customer. The repair is closed. |
| Cancelled | Not going ahead. The repair is closed. |
Priorities are Low, Medium, High and Urgent.
Closed repairs no longer count as open jobs on the customer's page and are never shown as overdue on the calendar.
Move a repair to the next status
- Open the repair and choose Change status.
- Pick the new status.
- If you like, write an Activity note (optional), for example "replaced seals, heating element checked".
- Choose Update status.
The change and your note are added to the repair's History.
You can also use the board. On Repairs, switch from Table to Kanban and drag a card into another column. This changes the status in the same way.
Every status change notifies the technician on the repair and all owners and admins. You are not notified about your own changes. See Notifications.
Find a repair
Repairs lists your repairs with their ID, Customer, Machine, Received date, SLA deadline, Technician, Status and Amount.
- The search box finds repairs by number, customer or machine.
- The status filter narrows the list to one or more statuses.
- Active, Archived and All switch between current and archived repairs.
Work on the repair page
The header shows the repair number, its status and priority, and the customer, machine and technician. The side panel repeats the key facts and the total. The page has four tabs:
- Overview: the progress through the statuses, the customer's contact details, the machine, the intake notes and the symptoms. The Jobs section lists visits planned for this repair; choose New job to send a technician on site. See Jobs.
- Diagnosis & parts: the Technical findings and the Line items & billing with the labour and the total.
- History: every change to the repair, newest first.
- Photos: intake and progress photos and videos.
To change anything you entered at intake, choose Edit.
Add photos and videos
Open the Photos tab and click Upload photos and videos, or drag files onto it. Owners, admins and technicians can add and remove files.
| Type | Formats | Largest file |
|---|---|---|
| Photos | JPEG, PNG, HEIC, HEIF, WebP | 20 MB |
| Videos | MP4, MOV, M4V, WebM | 100 MB |
A repair can hold up to 50 files.
Turn a repair into an invoice
Choose Generate invoice on the repair page, or in the row menu of the repair list. Tec-Flows creates a draft invoice for the repair's customer and opens it:
- Every part becomes an invoice line. If the part came from your inventory, its article number is added to the description.
- If the repair has labour hours and a rate, a labour line is added with the hours as the quantity and your rate as the price.
- VAT is set to your workshop's standard rate, and the invoice is due in 14 days.
- The invoice is linked to the repair.
Check the draft, then send it. See Quotes and invoices.
Archive or delete a repair
- Archive repair (in the menu on the repair page) takes a finished repair out of the list. It is still shown under Archived, in the customer's repair history and through any link. Choose Move back to active to bring it back. Owners, admins and technicians can archive.
- Delete repair removes the repair from every list. Only owners and admins can delete.
Deleting a repair also deletes its photos and videos for good. If you only want the repair out of the way, archive it instead.